Did you ever really have to jump start your car only to discover that the battery electronics deals was mired in gunk? That particular gunk that covers the battery happens to be corrosion formed by acid condensation. Fortunately, to get rid of the acid build-up, you just need to use a basic chemical solution. Should you have baking soda around the house, then you’re going to be able to remove the battery acid. You should be careful when doing it but there are just a couple of instructions on how to clean your battery.

You will have to first get the supplies you need, most of which are in your home. You basically need safety glasses for your eyes, baking soda, adjustable pliers and screwdrivers with insulated handles and a stiff-bristled brush. Some other items you need consists of a metal or plastic scraper, box or open-end wrenches, cleaning brushes for the battery terminal, and either a turkey baster or small funnel. A few sponges or maybe clean cloths, a spray bottle with all-purpose household cleaner, some rubber gloves and a large container of clean water. This all will make sure a safe cleaning of your car deals battery.

As the corroding deposits contain sulfuric acid, I suggest you use rubber gloves and the safety glasses. You need to always keep this substance away from your car, since it can eat away the paint. Depending on how corroded the battery happens to be, the amount of cleaning that is needed will be different. To be able to completely remove the dirt and corrosion, you will need to take the battery out of the vehicle. First use the plastic or metal scraper to get off any dirt you can, and also use the bristle brush.

The next phase would be to create a mixture of one tablespoon of baking soda to a pint of water, and take the turkey baster, and carefully apply the solution to the outside of the battery, along with the cable connections. Work the formula of baking soda inside the heavily corroded areas with the brush, and disconnect the battery cables from the terminals for easier cleaning. If disconnecting the battery pack, be sure to use the pliers or wrenches to loosen the connection and take them off with negative first then positive. For the terminals and additional parts, use the brush again to remove the corrosion and do a flush using the baking soda solution.

If there are still some dirt and grease remaining, use the spray household cleaner and sponge to remove them. Dry everything off with a clean cloth and then reassemble everything the way you took it apart, reconnecting the positive first. Finally, once everything is secured and accurately  assembled, you  will  now  have a safe and  clean  battery.